93: The top tech blogger is doing an online giveaway.

"After removing the back cover, you can see that the phone's interior is covered with a lot of cushioning foam. Not only around the camera on the mainboard and the battery, but also in other areas."

Many viewers were surprised by the internal structure of the kunpeng phone 2nd generation. They didn't expect to see such a reasonable and meticulous layout and craftsmanship immediately after removing the back cover.

"Next, let's look at the phone's interior. The kunpeng phone 2 still uses a three-stage internal structure: the mainboard at the top, the battery in the middle, and the tail plug board at the bottom, which integrates a linear motor and a speaker."

"First, let's look at the cameras. The two cameras of the kunpeng phone 2nd generation are in the upper left of the phone. The larger camera uses a Sony custom 13-megapixel lens and sensor, while the secondary camera uses a 2-megapixel depth-of-field lens."

"Based on my experience using it for over a month, compared to the Kunpeng mobile phone 1, Red Star has further optimized its photography. The biggest changes, in addition to a larger sensor, are algorithm optimizations, especially the real-time beauty function, which can perform skin smoothing, face slimming, and a series of other beauty functions in real-time when shooting people."

"Look, there's a very large heat dissipation film on the phone and the mainboard. And there will be another surprise when we remove the battery."

This was the first time many viewers saw the internal structure of a Kunpeng mobile phone. No blogger had performed a teardown of the first generation, but for someone like Number One in the Phone Circle to tear down a phone right after its release was a first.

And from the video, it seems the design of the kunpeng phone 2 is very regular, which also shows the effort Red Star Company put into the design of this phone.

Not to mention compared to domestic phones of the same period, even compared to Fruit and Samsung, its internal structure is not inferior at all.

"Let's first disconnect the battery cable and remove the battery."

"The battery I'm holding now is the Yangtze River Battery, newly developed by Red Star. I'll compare it with another battery."

Many viewers saw the battery comparison up close for the first time. Compared to a 3000mAh battery, it was a whole size smaller and also thinner.

"This battery has a typical value of 5500mAh. The manufacturer is Sunwoda Company. Let me see which company manufactures the cell."

In fact, the battery manufacturer and the cell manufacturer are completely different things. Just like the batteries on Fruit phones, the manufacturer is Sunwoda, but Sunwoda is only responsible for assembling the battery; they don't produce the cells.

Most of Fruit's cell suppliers are Sony or ATL. These cell manufacturers provide the cells to Fruit, and then contract manufacturers like Sunwoda assemble them to become the batteries we see.

Therefore, evaluating the quality of a battery doesn't depend on the manufacturer, but mainly on which company supplies the cell.

"The manufacturer of the Yangtze River Battery cell for Red Star is Yangtze River New Energy Company. Its predecessor was Saiwei Company. According to the information I found, this company was originally a cell manufacturer in Dongguan, but it was acquired by Red Star this year and renamed Yangtze River."

"In other words, Red Star's cell is produced by Red Star's own factory!"

Chen Chen's remarks instantly caused a sensation. After the press conference, there were many who questioned Red Star's Yangtze River Battery, speculating whether it was the latest technology developed by a cell manufacturer, with Red Star being the first to use it or co-develop it.

But now it seems that's not the case at all!

This is truly a cell independently researched and produced by Red Star.

"I believe everyone knows the energy density of this battery. After I finish disassembling and reassembling it, I will do a battery life test for everyone. Based on my usage over the past month, fast charging even seems a bit redundant."

"Going out for a day, browsing the Social Media Platform, taking photos, and chatting on WeChat, you don't have to worry about running out of battery."

"Next, we will disassemble the mainboard. First, remove the fixing screws on the mainboard shielding cover. After removing the cover, we can see the full view of the mainboard. There is also cushioning foam between this shielding layer and the mainboard."

"Now the entire mainboard is in front of us. Perhaps some viewers already have questions about the two copper pipes on this mainboard. Here we can see that these two copper pipes are connected to the phone's mainboard at one end, and the other end is in the middle of the phone, between the battery and the screen."

"So, what are these two copper pipes for?"

"Their biggest function is to dissipate heat for the phone's processor. By connecting the processor to the phone body, they can quickly and evenly transfer the phone's heat to the entire body, thereby preventing the phone's processor from overheating under high load."

"These are not ordinary copper pipes. Inside them is a special liquid that can quickly evaporate when heated and then condense at the end of the copper pipe. This entire process can carry away the heat emitted by the processor."

"This is the first time I've seen this design on a phone. Originally, this cooling method only existed in laptop computers. It can be said that this is a great innovation from Red Star! With maximum heat dissipation, everyone doesn't have to worry about the phone overheating when playing games!"

"Looking at the mainboard again, this largest chip is the soc processor. Next to it are Hynix RAM and Samsung flash memory chips."

"Now let's look at the sub-board. First, there are these two huge components. This circular one is a Z-axis linear motor. Based on my one month of experience, I can only describe this motor in one sentence: it's not inferior to Fruit!"

"As for what a linear motor and a rotor motor are, interested friends can search online. High-end models should use linear motors!"

"The other square component is the phone speaker, and next to the speaker, there is also a chip for sound quality conversion and compilation. President Chen did not mention the sound quality performance of this phone at the press conference. I don't know if he forgot or thought it was not worth mentioning."

"Anyway, the sound quality of this phone is completely not inferior to those HiFi music phones. When you get your hands on it in a few days and compare it, you'll know if I'm lying."

The speaker used in the kunpeng phone 2 was indeed specially tuned. In Chen Chen's plan, sound quality was also a very important parameter, and there were even plans for Harman Kardon tuning, similar to the xiaomi 10s in his previous life.

As for the motor, it is indeed a linear motor, but this is also the first time Red Star has used such a motor. In terms of current feedback interaction, it's simply usable.

At least it doesn't hum like other phones currently do.

The next generation kunpeng 3 will definitely use an X-axis linear motor, even though that type of motor is bulky.

But now Red Star has space freed up by the battery, so it can perfectly stack the internal structure.

On the contrary, the LCD screen is currently the most space-consuming part of the phone.

After the teardown introduction, Chen Chen reassembled the phone, demonstrating its internal craftsmanship to the audience throughout the process.

With the development of the phone industry, while stacking hardware is important, the overall detailed design is equally crucial.

The purpose of this teardown video was to showcase the design and manufacturing process of the Kunpeng mobile phone.

To let many users know that the Kunpeng mobile phone not only has outstanding hardware but also boasts first-class design, far ahead of other manufacturers.

"The phone can still power on after being disassembled and reassembled. Next, I will disassemble phones from other brands. Please continue to follow Number One in the Phone Circle for the latest phone information."

"Retweet this Social Media Platform post, and I will randomly select one retweeting user on the tenth of this month to give away a kunpeng phone 2 ultimate collectors edition!"

The purpose of this teardown video was to promote the internal design of their own phone, and this retweet giveaway event could make the video spread more widely, allowing more people to see the true level of the Kunpeng mobile phone.

Especially now that the ultimate collectors edition is hard to come by!

As the video ended, many Social Media Platform users retweeted it.

There's an ultimate collectors edition giveaway!

What if I win?