36: Intelligent robot complete!

An hour later, the Spirit Eye's voice came again:

"creator, the simulation test results for the magic gun simplification plan are out.

The simplified plan's shooting effects at different distances and targets met expectations.

The level 1 magic gun demonstrated good power at close range, reaching a spell intensity of 18 degrees, almost the limit for level 1 magic, consuming 0.1 units of level 1 magic power per shot.

The level 2 magic gun also performed well at medium range, reaching a spell intensity of 50 degrees, achieving the power of level 2 magic, consuming 0.1 units of level 2 magic power per shot.

The procurement list has also been compiled, and I have sent it to your research terminal."

After Brian reviewed the simulation test results and procurement list, he nodded in satisfaction:

"Excellent, Spirit Eye. Since that's the case, the subsequent production will wait until the robot body strengthening experiments are completed, then we'll conduct a unified test.

Next, we will prepare to procure these magic materials and simultaneously design preliminary experiments for robot body strengthening."

Saying this, Brian began to instruct the Spirit Eye again.

"Spirit Eye, select the cheapest materials on the Magic Net and purchase them. After purchase, transmit them via the Magic Net Formation."

The Spirit Eye quickly filtered out the most affordable magic material suppliers on the Magic Net and completed the purchase process.

Then, the Magic Net Formation was activated, and after a flicker of light, the required obsidian, mithril alloy, and adamantine were transmitted to the laboratory.

Brian looked at these materials and began to conceive the preliminary experimental design for robot body strengthening.

He first conducted a deeper analysis of the physical properties and magic conductivity of these three magic materials, and then, based on the analysis results, drew several different material fusion scheme sketches on paper.

By directly melting the obsidian into the body previously created with 'Mud to Stone' and 'Stone to Gold' using a smelting Magic Formation, the robot's body could reach level 2 strength, and the flow of magic power would also be good.

For a level 3 body, a small amount of mithril alloy and adamantine would be added and fused and smelted on the basis of a level 2 body.

After several days of effort, Brian, with the help of the Spirit Eye, finally found the most suitable and cost-effective solution.

Next was the phase of manufacturing the initial prototypes.

Brian planned to completely manufacture the intelligent robot, including weapon accessories like the magic gun and magic miniature missile.

Subsequently, he first manufactured three level 1 intelligent robot bodies.

Then, he activated the smelting Magic Formation and slowly melted the obsidian into one of the level 1 bodies.

As the obsidian integrated, the robot's body gradually became hard and lustrous, with magic power flowing smoothly within it, completing this level 2 intelligent robot body.

Next, he first proportioned the obsidian, mithril alloy, and adamantine required for the level 3 body, and then activated the smelting Magic Formation.

He melted them into another level 1 robot body.

By precisely controlling the temperature and magic power output of the smelting Magic Formation, these materials were perfectly fused.

The level 3 intelligent robot's body was thus completed.

Next,

He meticulously crafted level 1 and level 2 magic guns using suitable energy cores and materials, following the previously designed simplified magic gun plan.

For the magic miniature missile, he also optimized its production according to the new design plan, adjusting the structure of the explosion Magic Formation to make the missile's explosive power more concentrated and the fragment scattering range smaller.

After several days of busy work, three prototypes were finally manufactured.

They were:

level 1 intelligent robot

ID: 10001;

Equipped with: 1 level 1 energy core, 1 level 1 intelligent core, 1 level 1 magic gun;

Body Magic Formation: 1 level 1 Life Spirit Body Magic Formation, 1 level 1 Constant Monitoring Magic Formation;

Cost: Approximately 18 primary magic stones.

Level 2 intelligent robot

ID: 20001;

Equipped with: 1 level 2 energy core, 1 level 2 intelligent core, 1 level 2 magic gun;

Body Magic Formation: 1 level 2 Life Spirit Body Magic Formation, 1 level 2 Constant Monitoring Magic Formation;

Cost: Approximately 180 primary magic stones.

level 3 intelligent robot

ID: 30001;

Equipped with: 1 level 3 energy core, 1 level 3 intelligent core, 1 level 3 magic gun, 28 level 3 magic miniature missiles;

Body Magic Formation: 1 level 3 Life Spirit Body Magic Formation, 1 level 3 Constant Monitoring Magic Formation;

Cost: Approximately 2800 primary magic stones.

They stood silently in the center of the laboratory, their bodies exuding a mysterious and powerful aura.

The level 3 intelligent robot held a finely crafted magic gun in its hand, and its back was equipped with an optimized magic miniature missile launcher.

Brian looked at the three prototypes before him, his eyes filled with anticipation.

Next, he would conduct a comprehensive test of these intelligent robots, which embodied his countless efforts and wisdom, to see if they could achieve the expected results.

As long as the tests were successful, the next step would be to organize and modify their production line.

Brian first conducted basic functional tests on the level 1 intelligent robot.

He issued a series of simple commands, such as moving, turning, and grasping objects, which robot 10001 completed accurately and quickly.

Next, he tested its magic gun firing; at the set distance, the level 1 magic gun successfully hit the target, demonstrating its expected power.

Subsequently, he tested the level 2 intelligent robot, number 20001.

It could flexibly navigate complex terrain, completing more difficult action commands.

When firing the level 2 magic gun, both its precision and power met the corresponding standards.

Finally, it was the turn of the level 3 intelligent robot, number 30001.

Brian first had it perform high-speed movements and complex tactical maneuvers, which 30001 easily handled with its powerful body and intelligent core.

When testing the magic gun and magic miniature missile, the level 3 magic gun fired powerful magic projectiles, and the level 3 magic miniature missile accurately hit the target, with explosion effects consistent with the optimized expectations.

After a series of comprehensive tests, all three prototypes passed the trials and achieved Brian's desired results.

Brian was ecstatic, and he immediately began to work on modifying the production line.

Brian meticulously planned every aspect of the production line, from the supply of raw materials to the processing of various components, and finally to the assembly and debugging of the finished products.

He first simulated the layout of the production line in the laboratory, using the Spirit Eye's computational abilities to analyze the production efficiency of different layouts.

To ensure the stable operation of the production line, Brian decided to first create a batch of simple robots for production line debugging.

Although these simple robots did not possess the powerful combat capabilities and intelligence of the prototypes, they could handle basic tasks such as transportation and inspection.

Moreover, the Spirit Eye could control these simple robots at any time. If they couldn't do it, surely the Spirit Eye could?

Brian quickly manufactured five simple robots using some leftover scraps and low-grade magic materials.

Next, Brian began to build the framework of the production line.

He cleared a dedicated area on one side of the third-floor production room and installed various magical processing equipment, such as magic power forging machines and Magic Formation carving tables.

During the construction process, Brian continuously adjusted the details of the production line based on actual conditions.

He found that the connection between certain pieces of equipment was not smooth enough, which could lead to low production efficiency, so he optimized the placement of the equipment and the transmission devices.

The Spirit Eye also provided data support, analyzing potential problems in each step and offering corresponding solutions.