333: There was a problem while testing!

After Liu Xiaolin issued the order, hundreds of people began to quickly assemble hundreds of instruments and equipment, and every part of every production line was assembled one by one.

Everyone already had two installation experiences, so this time the installation speed was significantly faster than the previous two times.

Liu Xiaolin stood there, watching the massive lithography machine being assembled step by step, still unable to suppress the excitement and exhilaration in his heart.

The successful assembly of the previous two lithography machines was like crossing a river by feeling the stones. Today is different; he already knew the depth of the water and knew that the result would definitely be good, so Liu Xiaolin was even more eager to see a good result sooner.

Zhuang Wuya had already simulated the installation process of the lithography machine on the system simulation interface over and over again, so the installation scene in front of him was exactly the same as the scene he simulated. He was certain that this would definitely be another success.

After two hours of busy assembly, Zhuang Wuya looked at Liu Xiaolin and said, "General Manager Liu, the Langfang Fine Carving Chip Production Workshop 2.0 Lithography Machine has been completely assembled."

Liu Xiaolin nodded excitedly and said, "Great! The installation time was shortened quite a bit this time. Can we start testing now?"

"We can start testing now. Everyone is waiting for your command," Zhuang Wuya said with a smile.

"Alright, I announce: The Langfang Fine Carving Chip Production Workshop 2.0 Lithography Machine is starting the testing phase!" Liu Xiaolin said loudly, "Now, let's invite General Manager Lai to press the start button!" Liu Xiaolin said excitedly.

"Me? Let me press the start button?" Lai Junying couldn't believe his ears.

"Of course! You are the General Manager of Langfang Fine Carving, so naturally, you should press the start button!"

Lai Junying was excited now. He saw him stride towards the 2.0 Lithography Machine that had been successfully installed a few minutes ago. He took a deep breath, bent down, extended his right hand, and pressed the button.

"Buzz, buzz, buzz..." A rhythmic humming sound, starting weak and growing stronger, slowly began to resonate.

However, after three minutes, the humming sound became chaotic, as if it had changed from a steady start to a tremor. The buzzing sound was mixed with clicking and clacking noises, and one part of the lithography machine began to malfunction.

Zhuang Wuya felt that something was wrong when he heard the clicking and clacking noises. As soon as he saw the malfunctioning part, he immediately walked over and turned off the start button.

"What's going on?" Liu Xiaolin was stunned.

"There must have been a problem during the assembly process. I'll have the R&D personnel meticulously inspect every part immediately," Zhuang Wuya said calmly.

Liu Xiaolin said anxiously, "Then start checking quickly and eliminate the malfunction immediately."

Lu Yifan had already led the R&D personnel to surround the lithography machine and begin checking. They checked from the first part all the way to the last part, but found no problems.

"What should we do? What if we can't find the problem?" Liu Xiaolin asked nervously.

A lithography machine costs hundreds of millions. If the problem can't be found, the loss will be too great. Moreover, it will affect the Chip production schedule, and tomorrow Minister Yang from the Ministry of Science and Technology will be here to inspect. If the problem isn't solved by then, it will be embarrassing.

"Don't worry, let's check it again," Zhuang Wuya remained calm at the critical moment. "If no problems were found during today's assembly, we'll have to check every component. This is a bit of a large workload. Why don't you wait for news in the General Manager's office?"

"How can I sit still if I go back? I'll just stay here and watch you check," Liu Xiaolin said anxiously.

Zhuang Wuya couldn't bother with Liu Xiaolin at the moment; he also began to dedicate himself to checking each component.

Liu Xiaolin watched anxiously, his mind racing. Suddenly, he remembered seeing a component being bumped the day before yesterday during the lifting. Could this component have been damaged but not detected at the time?

Thinking of this, he immediately walked up to Zhuang Wuya. "Professor Zhuang, are there inspection records for the component that was bumped the day before yesterday? Which part was it?"

Zhuang Wuya glanced at Liu Xiaolin. "It was already checked that day. There was no problem."

"Sometimes a component that has just been bumped doesn't immediately show problems. Perhaps after testing, a screw might loosen or break. It's all possible," Liu Xiaolin said seriously.

"You're right. I'll have them check yesterday's inspection records immediately," Zhuang Wuya said.

Before long, the inspection records were found. It was the engine part of the second section.

"Focus the inspection on this engine," Zhuang Wuya said loudly.

"Okay, checking immediately." Several R&D personnel hurried over and began the inspection.

A person came over to report shortly after. "Professor Zhuang, there is indeed a problem with the engine in this section. A screw at the bottom is broken, which caused insufficient power and the clicking and clacking noises after starting."

"The screw must have cracked when it was bumped at the time, but it didn't affect its operation then, which is why it was thought to be fine. However, the bumps during transportation and the vibrations during installation just now caused the screw to completely break," Zhuang Wuya speculated.

"Yes, that's what we've concluded," the R&D personnel said.

"Are there any spare screws?" Zhuang Wuya asked anxiously.

"Not here. There should be some at our Jiantuan Electronics," the R&D personnel said helplessly.

"I'll drive you back to get the screws right now," Liu Xiaolin said immediately.

"That's the only way. Let's go!" Zhuang Wuya said, then took the R&D personnel and Liu Xiaolin out of the workshop, got in the car, and sped towards Jiantuan Electronics.

Liu Xiaolin drove extremely fast the whole way, not bothering to wait even for minor traffic jams, and directly entered a flying state. In this manner, he reached the destination, which would normally take thirty to forty minutes, in just twenty-seven or twenty-eight minutes, and parked directly in front of the lithography machine production workshop.

Zhuang Wuya and the R&D personnel immediately jumped out of the car and ran into the workshop. After finding the spare screws, they immediately returned, and then rushed back to Langfang Fine Carving like lightning. The round trip took less than an hour.

"Quick, change the screw now!" Zhuang Wuya said loudly.

The R&D personnel took the spare screw and immediately walked to the vicinity of the malfunctioning engine component, and began replacing the screw with effort.

This process wasn't simple either. Because there were many obstructions at the bottom of the component, disassembly took quite a bit of effort. After disassembling and then reassembling, it took an hour.

It was already twelve-thirty at this moment.

"Shall we test it again?" Zhuang Wuya asked.

"Let General Manager Liu press the start button this time. I wouldn't dare press it anymore," Lai Junying had always believed he shouldn't have pressed the button. If Liu Xiaolin had pressed it, maybe there wouldn't have been any problems.

. You are providing God Wu Ji's Rise of Heavy Industry: Building the Light of Domestic Products.