334: The lithography machine is finally able to operate normally!

"What does that have to do with you? There was a problem with the component," Liu Xiaolin said with a smile. "The person who tied the bell is the one to untie it, so you should still be the one to press the start button!"

"Really? Aren't you afraid I'll break it again?" Lai Junying said hesitantly.

"I'll say it again, you didn't break it, it was a component issue. Hurry up and press it," Liu Xiaolin said.

"Then I'll press it one more time," Lai Junying said, walking hesitantly towards the lithography machine and slowly reaching out to press the start button.

"Buzz buzz buzz..." A rhythmic hum slowly sounded, growing from weak to strong, very smoothly!

The lithography machine began production at every stage, step by step, very smoothly.

All the way to the final stage, three blue lights shot out, three robotic arms lifted, and three blank Chips were successively placed under the blue light.

Everyone watched the blue cursor operating back and forth.

Everyone's expressions were very calm this time, because at this point, it was basically a sure thing.

Four minutes later, the hum of the lithography machine stopped, and the three blue light waves gradually dissipated.

Three small Chips appeared on the three operating platforms.

"Is it ready?" Liu Xiaolin asked.

"It's ready," Zhuang Wuya nodded and said.

Under everyone's gaze, Liu Xiaolin quickly walked over, picked up the three small and exquisite Chips, looked at them, and then handed them to the R&D personnel beside him: "Take them to the testing platform next door for testing."

The R&D personnel took the Chips and inserted them into the testing platform next door.

"Start testing!"

"All circuit diagrams are correct..."

The R&D personnel stared intently at the data on the instrument, reporting loudly.

"Equipment operation is correct..."

"No error prompts..."

"Instrument is functioning normally..."

"Everything is operating normally! Very perfect!"

Next was the test of the second Chip, and the result was the same, everything was operating normally!

Finally, the test of the third Chip was also successful!

"We succeeded! Langfang Fine Carving's first 2.0 Lithography Machine has been successfully installed!" Lai Junying shouted excitedly!

Liu Xiaolin looked at the scene before him and finally breathed a sigh of relief. That was close! This was the first time a problem occurred after installation, and it scared him. x33xs.com

At this moment, Zhuang Wuya also looked relaxed. When the lithography machine had a problem, his brows had been tightly furrowed, only now did they relax and he smiled.

"Thanks to General Manager Liu's reminder, we were able to find the problem so quickly," Lu Yifan also breathed a sigh of relief and said with a smile.

"Yes, thanks to General Manager Liu today, otherwise we don't know how long it would have taken to test," Zhuang Wuya also nodded and said.

"That's also because everyone's work is usually done well, and all kinds of records are well preserved. We could immediately find which component was hit, which greatly improved efficiency," Liu Xiaolin also said with a smile.

"You are all great heroes, I admire you so much! Let's hurry to the cafeteria to eat, it's already past one o'clock," Lai Junying said with a beaming smile.

"Ah? It's already that late?" Liu Xiaolin looked at his watch in surprise. Indeed, it was already one-thirty. "Let's go, let's go, hurry up and eat. I didn't feel hungry at first, but now that you mention it, I suddenly feel starving."

This half-day was truly thrilling, everyone's nerves had been tense. Only after relaxing did they feel hungry.

"I feel hungry too. Let's go, let's eat," Zhuang Wuya and Lu Yifan both said.

The group walked towards the cafeteria, chatting as they went.

"I was scared to death just now. I thought I pressed the start button incorrectly, causing the lithography machine to have a problem," Lai Junying patted his chest and said with lingering fear.

"Good heavens, how can you be so unconfident, you're a company General Manager!" Zhuang Wuya said with a smile.

"Exactly, when General Manager Lai pressed the start button the second time, his hands were trembling. I wanted to laugh just watching," Lu Yifan said, unable to help but laugh.

"Oh, I experienced one failure, I was afraid of failing again," Lai Junying said.

"Didn't I tell you, it had nothing to do with you, it was a component issue, and yet you're still so timid," Liu Xiaolin said, shaking his head.

"It's my first time dealing with a lithography machine, of course I'd be timid," Lai Junying said with a chuckle.

"Production was supposed to start at two in the afternoon, but now it seems it will have to wait until tomorrow to start production, right?" Ai Xinren asked.

"No need, after we finish eating and go back, you can arrange for personnel in each position to start work and begin production. It just so happens that Professor Zhuang is here, so he can help you solve any problems," Liu Xiaolin said.

"Okay, then I'll hurry and eat a little and go back to organize production," Ai Xinren replied.

"There aren't many people in the cafeteria today," Liu Xiaolin said when they walked in.

"It's almost two o'clock, the other employees finished eating long ago. Only us, the lithography machine installation personnel, haven't eaten, you know?" Lai Junying explained.

"Oh, I forgot about that, haha. Let's hurry and get food, I'm so hungry I could eat a cow," Liu Xiaolin said, taking a tray to get food.

After they all got their food, they gathered around a dining table and started eating.

"By the way, I brought the production schedule made by the Sales Department. It's in my car. I'll give you a copy later. You can do a trial production for a few hours this afternoon," Liu Xiaolin said to Lai Junying and Ai Xinren.

"Okay, I will strictly follow this schedule for production," Ai Xinren nodded and replied.

"Yes, I will always pay attention to the production situation in the Chip Production Workshop," Lai Junying said while eating heartily.

"By the way, how is the production going on the fine carving processing side?" Liu Xiaolin asked.

"It's going very smoothly. After our sample purple copper nuts were approved by Deli Air Conditioning, we started batch fine carving processing. We can complete the set task every day and deliver goods to their Headquarters once a week, payment upon delivery. Both sides are cooperating very happily," Lai Junying said happily. "General Manager Hong is really reliable. It was so lucky to be able to sign a contract with him."

"It's still our good technology and equipment that won General Manager Hong's favor, so no matter when, you have to be strong yourself to forge iron," Liu Xiaolin said while chewing on sweet and sour pork ribs.

"Yes, the employees of our Langfang Fine Carving, whether it's execution or technology, are truly outstanding," Lai Junying was extremely proud.

"I'm finished eating, I'm going to the workshop now to arrange production. You guys eat slowly," Ai Xinren stood up and said while they were chatting.

"Okay, you go ahead and arrange for employees to start work, I'll go over after I finish eating," Liu Xiaolin said, speeding up his eating.

The production schedule was still in his car. After eating, he still had to give it to him and explain the contents.

. You provide the Great God Xiao Ming Wuji's rise of heavy industry: creating the light of domestic goods